STA Certifications

Clarity
Similar to a nutrition label, the STA Program’s Compost Technical Data Sheet (CTDS) includes test results, a list of ingredients, and recommended directions for use.
Consistency
The STA Program provides checks and balances within the STA Lab and Participant network to ensure proficiency and consistency with testing procedures and compliance, providing apples-to-apples comparisons of compost properties.
Confidence
Similar to trusting a vehicle history report when purchasing a vehicle, the STA’s CTDS report gives consumers confidence and knowledge of what is in the compost and how it was produced.

STA Certified Compost is the gold standard for compost in the US.

Every batch is tested by an approved lab, follows EPA limits on pathogens and metals, and comes with documentation you can hand to a client, an inspector, or your own team.

Read the official USCC requirements →

 STA Certified Compost seal

USCC Requirements for Compost Manufacturers

For a compost product to be STA Certified Compost from the US Composting Council, manufacturers must meet the following criteria. This information is sourced directly from CompostingCouncil.org.

01   The product must meet the U.S. Composting Council’s definition of compost
According to the Composting Council, to be considered compost, a product must:

  • Be created via the controlled aerobic, biological decomposition of biodegradable materials.
  • Undergo mesophilic (68°-113°F) and thermophilic (106°-252°F) temperatures to reduce the viability of pathogens and weed seeds, and to stabilize carbon levels so as to be beneficial to plant growth. This thermophilic heat sanitization must meet the standards of the Processes to Further Reduce Pathogens (PFRP) as defined in the Code of Federal Regulations Title 40, Part 503, Appendix B, Section B.
  • Be used as a soil amendment or to contribute plant nutrients.
  • Bear little resemblance to the raw material from which it was created.
  • Be an organic matter that is able to improve the chemical, physical, and biological characteristics of soils or growing media.

Or a product must:

  • Be vermicompost/worm castings (worm manure) for which all feedstocks have been composted prior to being digested by the worms.
  • Meet PFRP standards.
02   The product must comply with all federal, state, and local regulations and permitting
STA Certified Compost products are subject to regulation from officials in order to control for environmental impact (air emissions, leachate), impact to neighbors (odor, traffic), and operational issues (safety, end product applications).

In Colorado, the regulatory agency that oversees composting is the Colorado Department of Public Health and Environment. You can learn more about federal, state, and local regulations on the U.S. Composting Council’s Regulations page.

If any issues arise with regulations or permitting, manufacturers are advised to immediately inform the U.S. Composting Council.

03   Manufacturers must use Composting Council-approved labs for testing
These labs use TMECC (Test Method for the Examination of Composting and Compost) methods and are tested against one another three times a year through the STA’s CAP program, ensuring that each lab is held to a high standard.
04   Manufacturers must periodically submit compost products for quality testing
Product testing guidelines are as follows:

  • Compost samples must only be sent to STA Compost Certified labs.
  • Samples must be collected from ready-to-sell finished compost using the TMECC compost sampling methods. Learn more in the “Collecting Field Samples” resource provided by the U.S. Composting Council.
  • Compost samples should be sent in using the Chain of Custody form.
  • Frequency of testing depends on the annual finished wet tonnage of compost manufactured:
    • 1 – 6,200 tons: 1 sample per 3 months
    • 6,201 – 17,500 tons: 1 sample per 2 months
    • More than 17,500 tons: 1 sample per month
  • Both the compost manufacturer and the U.S. Composting Council receive test results directly from the labs.
05   Manufacturers must provide customers with STA Certified Compost Technical Data Sheets (CTDS)
CTDS sheets include information about the composition of a compost product, its test results, practical applications, and instructions for use.
06   The product must meet EPA testing limits for heavy metals and pathogens
The Environmental Protection Agency (EPA) sets maximum concentrations for heavy metals and pathogens in every compost product, expressed on a dry-weight basis:

Heavy Metal Concentration Limits
  • Arsenic (As) — 41 mg/Kg
  • Cadmium (Cd) — 39 mg/Kg
  • Copper (Cu) — 1,500 mg/Kg
  • Lead (Pb) — 300 mg/Kg
  • Mercury (Hg) — 17 mg/Kg
  • Nickel (Ni) — 420 mg/Kg
  • Selenium (Se) — 100 mg/Kg
  • Zinc (Zn) — 2,800 mg/Kg
Pathogen Concentration Limits
  • Fecal Coliform — <1,000 MPN/gram
  • Salmonella — <3 MPN/gram

Full test results for each STA Certified Compost product are available in its CTDS. Request a CTDS report →

07   Compost manufacturers must sign the STA Certified Compost rules contract
This contract ensures compliance with all of the regulations outlined on this page.
08   Manufacturers must pay a yearly fee to the U.S. Composting Council
These fees help to sustain the STA Certified Compost program.
09   Manufacturers must renew their USCC STA Certified Compost contract and payments yearly
To learn more about STA Certification standards, visit CompostingCouncil.org or feel free to contact A1 Organics directly.

Ready to put STA Certified Compost to work?

Browse Compost Products
Download Lab Reports

To learn more about STA Certification standards, visit CompostingCouncil.org, view our lab reports, or feel free to contact A1 Organics.

Recent Posts

Loading recent posts…

Contact Us